{"title":"Switchgear and Panel Wiring","description":"","products":[{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687331155,"sku":"CABL1900","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1900-U01_1600x1600_da42aa74-9c73-471a-ab40-a7a1416559e8.jpg?v=1774724295"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687429459,"sku":"CABL1901","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1901-U01_1600x1600_2732e02d-0fe1-4dfb-a5bd-08501cb52dd2.jpg?v=1774724296"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687494995,"sku":"CABL1902","price":42.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1902-U01_1600x1600_2ccb6edc-4e96-47a3-8025-92eca2c709dc.jpg?v=1774724296"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687527763,"sku":"CABL1903","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1903-U01_1600x1600_33bc2038-af4e-4feb-a392-bf67d5589ba7.jpg?v=1774724297"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687593299,"sku":"CABL1904","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1904-U01_1600x1600_ad35e46d-2988-435a-a8ec-d9a29d751844.jpg?v=1774724298"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-green","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Green","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687626067,"sku":"CABL1905","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1905-U01_1600x1600_3c72bc86-cc1f-466a-8e13-10293244bc0c.jpg?v=1774724299"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-lilac","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Lilac","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687691603,"sku":"CABL1906","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1906-U01_1600x1600_89a5668e-ac1e-47e5-891d-b7189fcfbcd7.jpg?v=1774724303"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-orange","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Orange","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687724371,"sku":"CABL1907","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1907-U01_1600x1600_a7eb35c8-ef4b-41cb-b42e-21a5f50993dd.jpg?v=1774724304"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-pink","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Pink","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687789907,"sku":"CABL1908","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1908-U01_1600x1600_eddd0c07-6edb-4ecc-95d0-2909e7cbaccc.jpg?v=1774724305"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-red","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Red","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687822675,"sku":"CABL1909","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1909-U01_1600x1600_71bc1faf-4654-4210-b805-77fa55ef0aa7.jpg?v=1774724306"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-white","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m White","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687855443,"sku":"CABL1910","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1910-U01_1600x1600_0d7c1a7a-2ca8-42dc-9a3f-bec97c4d0a92.jpg?v=1774724306"},{"product_id":"elumen8-tri-rated-switchgear-wire-1-5mm-100m-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 1.5mm 100m Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 1.5mm² Max. current rating open air: 21A Nominal stranding of conductor: 30\/0.25mm Nominal overall diameter: 3.3mmØ Weight per m: 0.023kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687888211,"sku":"CABL1911","price":42.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1911-U01_1600x1600_727cf6fd-8d08-49d2-850f-e7e17142b361.jpg?v=1774724307"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687953747,"sku":"CABL1912","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1912-U01_1600x1600_900a1f6d-2915-4086-be86-38d4daf885a7.jpg?v=1774724308"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361687986515,"sku":"CABL1913","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1913-U01_1600x1600_30b9d4a6-a09f-483e-a08a-6da3e44df07d.jpg?v=1774724309"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688019283,"sku":"CABL1914","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1914-U01_1600x1600_46b6165a-134e-4f06-bdfd-26616a7638a3.jpg?v=1774724310"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688117587,"sku":"CABL1915","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1915-U01_1600x1600_90ea78c7-acd8-497d-b57c-15296a40d160.jpg?v=1774724311"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688150355,"sku":"CABL1916","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1916-U01_1600x1600_7597e086-eea2-4be4-900d-b7c157108f75.jpg?v=1774724311"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-green","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Green","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688183123,"sku":"CABL1917","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1917-U01_1600x1600_03f65c2a-2954-47a3-86e2-064c481df5c1.jpg?v=1774724312"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-lilac","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Lilac","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688248659,"sku":"CABL1918","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1918-U01_1600x1600_389cf295-2335-4652-a770-bc11d8b040df.jpg?v=1774724313"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-orange","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Orange","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688281427,"sku":"CABL1919","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1919-U01_1600x1600_7ed23d41-0286-4648-99db-15aecd084c5b.jpg?v=1774724314"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-red","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Red","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688314195,"sku":"CABL1920","price":64.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1920-U01_1600x1600_1ab86c98-0bc1-4013-820c-378c8b319314.jpg?v=1774724315"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-white","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m White","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688346963,"sku":"CABL1921","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1921-U01_1600x1600_b095c30c-f64c-4110-aec5-ee91e399c04e.jpg?v=1774724316"},{"product_id":"elumen8-tri-rated-switchgear-wire-2-5mm-100m-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 2.5mm 100m Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60° Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 2.5mm² Max. current rating open air: 30A Nominal stranding of conductor: 50\/0.25mm Nominal overall diameter: 3.7mmØ Weight per m: 0.033kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688412499,"sku":"CABL1922","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1922-U01_1600x1600_094b3b36-857a-41a9-a161-7420b3334e21.jpg?v=1774724317"},{"product_id":"elumen8-tri-rated-switchgear-wire-4mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 4mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 4mm² Max. current rating open air: 41A Nominal stranding of conductor: 56\/0.3mm Nominal overall diameter: 4.3mmØ Weight per m: 0.051kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688445267,"sku":"CABL1923","price":107.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1923-U01_1600x1600_9045580b-3db8-4a06-abd9-6ef9c79551cb.jpg?v=1774724317"},{"product_id":"elumen8-tri-rated-switchgear-wire-4mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 4mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 4mm² Max. current rating open air: 41A Nominal stranding of conductor: 56\/0.3mm Nominal overall diameter: 4.3mmØ Weight per m: 0.051kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688478035,"sku":"CABL1924","price":107.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1924-U01_1600x1600_5d9502ca-52ba-4305-bba4-c0e8c5809a8b.jpg?v=1774724318"},{"product_id":"elumen8-tri-rated-switchgear-wire-4mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 4mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 4mm² Max. current rating open air: 41A Nominal stranding of conductor: 56\/0.3mm Nominal overall diameter: 4.3mmØ Weight per m: 0.051kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688543571,"sku":"CABL1925","price":107.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1925-U01_1600x1600_2000e963-9c1e-4922-8f37-167ee7184264.jpg?v=1774724319"},{"product_id":"elumen8-tri-rated-switchgear-wire-4mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 4mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 4mm² Max. current rating open air: 41A Nominal stranding of conductor: 56\/0.3mm Nominal overall diameter: 4.3mmØ Weight per m: 0.051kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688576339,"sku":"CABL1926","price":107.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1926-U01_1600x1600_53ce683a-b471-4209-a021-057188147a7c.jpg?v=1774724321"},{"product_id":"elumen8-tri-rated-switchgear-wire-4mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 4mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 4mm² Max. current rating open air: 41A Nominal stranding of conductor: 56\/0.3mm Nominal overall diameter: 4.3mmØ Weight per m: 0.051kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688609107,"sku":"CABL1927","price":107.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1927-U01_1600x1600_274f5ab6-e724-42c7-97ca-8f05baa9a74d.jpg?v=1774724321"},{"product_id":"elumen8-tri-rated-switchgear-wire-6mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 6mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 6mm² Max. current rating open air: 53A Nominal stranding of conductor: 84\/0.3mm Nominal overall diameter: 5.3mmØ Weight per m: 0.073kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688674643,"sku":"CABL1928","price":157.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1928-U01_1600x1600_f4e7602a-9f15-4bd2-9553-83b9e71d90b1.jpg?v=1774724321"},{"product_id":"elumen8-tri-rated-switchgear-wire-6mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 6mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 6mm² Max. current rating open air: 53A Nominal stranding of conductor: 84\/0.3mm Nominal overall diameter: 5.3mmØ Weight per m: 0.073kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688707411,"sku":"CABL1929","price":157.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1929-U01_1600x1600_ae151dca-17de-4fda-828a-7d09e78df3e6.jpg?v=1774724323"},{"product_id":"elumen8-tri-rated-switchgear-wire-6mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 6mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 6mm² Max. current rating open air: 53A Nominal stranding of conductor: 84\/0.3mm Nominal overall diameter: 5.3mmØ Weight per m: 0.073kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688740179,"sku":"CABL1930","price":157.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1930-U01_1600x1600_fadce487-14e9-45c5-9eb0-c330fc172f65.jpg?v=1774724324"},{"product_id":"elumen8-tri-rated-switchgear-wire-6mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 6mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 6mm² Max. current rating open air: 53A Nominal stranding of conductor: 84\/0.3mm Nominal overall diameter: 5.3mmØ Weight per m: 0.073kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688805715,"sku":"CABL1931","price":157.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1931-U01_1600x1600_d933892b-cada-4a60-97c9-92469b689cd4.jpg?v=1774724326"},{"product_id":"elumen8-tri-rated-switchgear-wire-6mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 6mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 6mm² Max. current rating open air: 53A Nominal stranding of conductor: 84\/0.3mm Nominal overall diameter: 5.3mmØ Weight per m: 0.073kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688838483,"sku":"CABL1932","price":157.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1932-U01_1600x1600_2451d10d-d0f6-4e0f-92da-f8dc7d6c75b1.jpg?v=1774724327"},{"product_id":"elumen8-tri-rated-switchgear-wire-10mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 10mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 10mm² Max. current rating open air: 75A Nominal stranding of conductor: 80\/0.4mm Nominal overall diameter: 7.1mmØ Weight per m: 0.124kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688904019,"sku":"CABL1933","price":266.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1933-U01_1600x1600_9a9506a0-00bf-4fe6-9871-c729ad60235a.jpg?v=1774724329"},{"product_id":"elumen8-tri-rated-switchgear-wire-10mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 10mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 10mm² Max. current rating open air: 75A Nominal stranding of conductor: 80\/0.4mm Nominal overall diameter: 7.1mmØ Weight per m: 0.124kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361688936787,"sku":"CABL1934","price":266.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1934-U01_1600x1600_bebfc65c-6d32-4ad1-a244-0982c6cc3720.jpg?v=1774724330"},{"product_id":"elumen8-tri-rated-switchgear-wire-10mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 10mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 10mm² Max. current rating open air: 75A Nominal stranding of conductor: 80\/0.4mm Nominal overall diameter: 7.1mmØ Weight per m: 0.124kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689002323,"sku":"CABL1935","price":266.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1935-U01_1600x1600_e81069b3-2210-4952-b3a1-fa20e19e507a.jpg?v=1774724332"},{"product_id":"elumen8-tri-rated-switchgear-wire-10mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 10mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 10mm² Max. current rating open air: 75A Nominal stranding of conductor: 80\/0.4mm Nominal overall diameter: 7.1mmØ Weight per m: 0.124kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689035091,"sku":"CABL1936","price":266.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1936-U01_1600x1600_62dff9c6-ddc7-46e2-9b59-5faf2c3d6450.jpg?v=1774724333"},{"product_id":"elumen8-tri-rated-switchgear-wire-10mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 10mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 10mm² Max. current rating open air: 75A Nominal stranding of conductor: 80\/0.4mm Nominal overall diameter: 7.1mmØ Weight per m: 0.124kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689067859,"sku":"CABL1937","price":266.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1937-U01_1600x1600_0e09cce5-f8f4-40b3-93e4-f57d1b0c29b3.jpg?v=1774724334"},{"product_id":"elumen8-tri-rated-switchgear-wire-16mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 16mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 16mm² Max. current rating open air: 100A Nominal stranding of conductor: 126\/0.4mm Nominal overall diameter: 8.7mmØ Weight per m: 0.2kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689133395,"sku":"CABL1938","price":406.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1938-U01_1600x1600_b39c63a4-4942-40fb-bdde-fb2c68a65b3f.jpg?v=1774724334"},{"product_id":"elumen8-tri-rated-switchgear-wire-16mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 16mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 16mm² Max. current rating open air: 100A Nominal stranding of conductor: 126\/0.4mm Nominal overall diameter: 8.7mmØ Weight per m: 0.2kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689166163,"sku":"CABL1939","price":406.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1939-U01_1600x1600_12129f53-24a2-45bb-98a7-aeea54475014.jpg?v=1774724336"},{"product_id":"elumen8-tri-rated-switchgear-wire-16mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 16mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 16mm² Max. current rating open air: 100A Nominal stranding of conductor: 126\/0.4mm Nominal overall diameter: 8.7mmØ Weight per m: 0.2kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689264467,"sku":"CABL1940","price":406.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1940-U01_1600x1600_e1379dee-c48e-4ccf-8e0e-15f93d4a9fe3.jpg?v=1774724337"},{"product_id":"elumen8-tri-rated-switchgear-wire-16mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 16mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 16mm² Max. current rating open air: 100A Nominal stranding of conductor: 126\/0.4mm Nominal overall diameter: 8.7mmØ Weight per m: 0.2kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689297235,"sku":"CABL1941","price":406.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1941-U01_1600x1600_26c38178-d52e-428b-9840-b6d31f3e2864.jpg?v=1774724338"},{"product_id":"elumen8-tri-rated-switchgear-wire-16mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 16mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 16mm² Max. current rating open air: 100A Nominal stranding of conductor: 126\/0.4mm Nominal overall diameter: 8.7mmØ Weight per m: 0.2kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689362771,"sku":"CABL1942","price":406.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1942-U01_1600x1600_9f2dde3c-4e54-4b73-a862-728022d0b321.jpg?v=1774724339"},{"product_id":"elumen8-tri-rated-switchgear-wire-25mm-100m-black","title":"Elumen8 Tri-Rated Switchgear Wire 25mm 100m Black","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 25mm² Max. current rating open air: 136A Nominal stranding of conductor: 196\/0.4mm Nominal overall diameter: 10.3mmØ Weight per m: 0.295kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689428307,"sku":"CABL1943","price":644.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1943-U01_1600x1600_f070756a-0d8f-4ff0-bf5b-bf093eadf508.jpg?v=1774724340"},{"product_id":"elumen8-tri-rated-switchgear-wire-25mm-100m-blue","title":"Elumen8 Tri-Rated Switchgear Wire 25mm 100m Blue","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 25mm² Max. current rating open air: 136A Nominal stranding of conductor: 196\/0.4mm Nominal overall diameter: 10.3mmØ Weight per m: 0.295kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689493843,"sku":"CABL1944","price":644.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1944-U01_1600x1600_2f4dadaf-318a-4383-a1d6-16cdd8354fb6.jpg?v=1774724341"},{"product_id":"elumen8-tri-rated-switchgear-wire-25mm-100m-brown","title":"Elumen8 Tri-Rated Switchgear Wire 25mm 100m Brown","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 25mm² Max. current rating open air: 136A Nominal stranding of conductor: 196\/0.4mm Nominal overall diameter: 10.3mmØ Weight per m: 0.295kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689526611,"sku":"CABL1945","price":644.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1945-U01_1600x1600_bfa77dd1-6871-41a9-bb37-bdd0d29187e8.jpg?v=1774724341"},{"product_id":"elumen8-tri-rated-switchgear-wire-25mm-100m-green-yellow","title":"Elumen8 Tri-Rated Switchgear Wire 25mm 100m Green\/Yellow","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 25mm² Max. current rating open air: 136A Nominal stranding of conductor: 196\/0.4mm Nominal overall diameter: 10.3mmØ Weight per m: 0.295kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689559379,"sku":"CABL1946","price":644.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1946-U01_1600x1600_f87e012c-e9c9-4dc9-b8a5-251f30c173d4.jpg?v=1774724342"},{"product_id":"elumen8-tri-rated-switchgear-wire-25mm-100m-grey","title":"Elumen8 Tri-Rated Switchgear Wire 25mm 100m Grey","description":"These cables are intended for use in the wiring of switch control metering relay and instrument panels of power distribution switchgear and internal connections. They are intended for use at alternating voltages not exceeding 600V to earth and direct voltages not exceeding 1000V to earth. When installed in the equipment they are suitable for wiring circuits for which the prescribed alternating test voltage does not exceed 4kV RMS for 1 minute. By being approved to three international standards Tri-Rated cable is suitable for equipment installations required to meet both North American and European wiring regulations and codes of practice.\u003cbr\u003e\u003cbr\u003eMade in Britain Manufactured to: BS 6231 Type CK Underwriters Laboratory Listed This cable is recognised by CSA and UL as resistant to oil at temperatures up to 60°C Spread of Flame: Tested to BS EN 60332-1-2 VW-1 and FT-1 Temperature range: UL and CSA recognised as heat resisting with a maximum conductor operating temperature of 105°C. BS6231 specifies a maximum operating temperature of 90°C for continuous use - Annex A of BS6231 explains how under certain conditions these cables can operate at up to 105°C\u003cbr\u003e\u003cbr\u003eCross section: 25mm² Max. current rating open air: 136A Nominal stranding of conductor: 196\/0.4mm Nominal overall diameter: 10.3mmØ Weight per m: 0.295kg","brand":"Elumen8","offers":[{"title":"Default Title","offer_id":53361689624915,"sku":"CABL1947","price":644.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1041\/8667\/5539\/files\/CABL1947-U01_1600x1600_f7251714-0f78-41a6-9dc3-dfa670279f8b.jpg?v=1774724343"}],"url":"https:\/\/www.venutec.co.uk\/collections\/switchgear-and-panel-wiring.oembed","provider":"Venutec","version":"1.0","type":"link"}